The hottest point in the valve industry scientific

2022-08-20
  • Detail

As of last year, there were more than 350 pump and valve enterprises in the city, and the total output value of the pump and valve industry in the city was more than 8 billion yuan. However, there have always been "pain points" in the development of the pump and valve industry in this area, such as small, scattered and complete industries, poor agglomeration, serious low-end and homogenization of products, and few large and strong leading enterprises. The pump and valve industry has turned

in recent years, with the rapid development of food, pharmaceutical and other industries, a large number of valve products with a fundamental market demand of more than 1 ton have been generated, and the valve industry has also achieved rapid development. At present, there are various types of food valves in China. Butterfly valves, shunt valves, control valves and other valves are widely used to accurately control liquids, gases and other media. Process parameters such as pressure, flow and liquid level are maintained at the given value, and are applied in food and beverage, pharmaceutical, chemical and other industries

it is understood that the output of valve products (including food valves) in China has basically maintained a stable growth. According to statistics, China's valve output exceeded 7.8 million tons in 2017, with a year-on-year increase of nearly 3%. In 2018, the output of valves in China exceeded 3 and easily decomposed over 8million tons. In 2019, the output of valves in China reached 8.2 million tons, with a year-on-year increase of about 5%. It is expected that the market demand for valve products in China will still show an upward trend in

however, it should be mentioned that from a global perspective, there are a large number of enterprises in the valve industry, and the competition is fierce on the whole. In contrast, the overall market concentration of the industry is low, and most domestic valve enterprises are in the low-end market of the valve industry

although the valve products in the low-end market have strong versatility, the technical content is not high, which is mainly reflected in the aspects of sealing, appearance design, service life, technical level of electric devices and pneumatic devices, and the overall competitiveness of the products is not strong. With the continuous increase of new entrants in the industry, the market competition of valve products (including food valves) will be more intense, and the profit level of the low-end valve market will also decline

however, it is gratifying that with the active support and guidance of local governments and the support of new generation technologies such as IOT, big data and artificial intelligence, the scientific and technological content of valve products is improving, the competitiveness is enhancing, the pace of domestic valves replacing imports is accelerating, and the power of domestic valves is rising

it is understood that Jingjiang City, Jiangsu Province, is famous nationwide for its "hometown of stainless steel pumps and valves", and the pump and valve industry is one of the city's traditional advantageous industries. In recent years, facing the requirements of high-quality development, Jingjiang City, Jiangsu Province has actively guided valve product enterprises to take scientific and technological innovation as the guide, aiming at the direction of "green, efficient, electromechanical integration and intelligence", implementing technological innovation and strategies such as excessive standardization due to deformation, intelligent manufacturing and robotics, increasing industry university research cooperation and innovation in industrial chain, product chain and value chain, and forging new advantages in development

as of last year, there were more than 350 pump and valve enterprises in the city, and the total output value of the pump and valve industry in the city was more than 8billion yuan. However, there have always been "pain points" in the development of the pump and valve industry in this area, such as small, scattered and complete industries. If the above conditions are normal, the convergence is poor, the phenomenon of low-end products and homogenization is serious, and there are few large and strong leading enterprises, the transformation and upgrading of the pump and valve industry is difficult

in order to further enhance the competitiveness of the whole industrial chain of pumps and valves, and to better meet the market development trend, enterprises in the city focus on high-tech products and emerging industries, and continue to increase new product research and development efforts and technological transformation investment. Now, enterprise research and development investment shows an increasing trend

at the same time, enterprises also strengthen the expansion of strategic cooperation with colleges and universities, scientific research institutions, and explore the innovative cooperation mode of "teaching use", which will help to speed up the implementation and transformation of scientific research achievements, and strive to "overtake in the curve" in the new round of development

with the growing demand for valve products in downstream food, pharmaceutical and other industries, and led by scientific and technological innovation, the product manufacturing process, scientific and technological content and quality level of domestic valve enterprises are gradually improving, and the market prospect of domestic valves in the future is very optimistic. Domestic valve enterprises that focus on scientific and technological innovation and have strong strength may win more opportunities to further improve their product market share

Copyright © 2011 JIN SHI